Selcom S.r.l. produces unidirectional fabrics with two different technologies:
- Unidirectional stitched with any orientation (0º/90º/30º): produced with multiaxial technology in standard width of 1270 mm (2540 mm for special requests). Due to the fact that it is stitched, it can be cut down into tapes without the fibres falling apart. These products can be made using any type of fibre (or hybrid), with a varying weight between 200 and 2000 g/sqm, and assembled with mat/CSM and non-wovens.
- Unidirectional tapes not stitched in a single orientation (0º): produced with conventional technology (warp –weft), therefore they are not stitched. They are supplied in a set width that is variable between 20 and 1000 mm. If the tape is cut to a smaller width, the fibres fall apart. These products can be made using any type of fibre (or hybrid), with a varying weight between 200 and 2000 g/sqm and cannot be assembled with mats or non-wovens materials.
Weft direction is normally in “E” glass fibre or polyester fibre.
The following table shows the most commonly used and best known types of unidirectional fabrics:

	Item		Fibre type		0° g/ sqm		+ 45° g/ sqm		90° g/ sqm		-45° g/ sqm		CSM g/ sqm		Stitch bonding g/ sqm		Total weight g/ sqm
	UNIE360		"E" Glass		300		-		60		-		-		16		376
	UNIE400		"E" Glass		390		-		60		-		-		16		466
	UNIE520		"E" Glass		480		-		50		-		-		16		546
	UNIE640		"E" Glass		600		-		50		-		-		15		665
	UNIE1000		"E" Glass		960		-		50		-		-		16		1026
	UNIE1200		"E" Glass		1150		-		50		-		-		16		1216
	UNIE1000M150		"E" Glass		960		-		50		-		150		16		1176
	UNIC300		Carbon 12K		300		-		30		-		-		-		330
	UNIC400		Carbon 12K		400		-		30		-		-		-		430
	UNIC600		Carbon 24K		600		-		30		-		-		-		630
	UNIK300		Aramid		295		-		30		-		-		-		325
	UNIKE300		"E" Glass aramid		300		-		30		-		-		-		330